Qbiss One Dizajn

Istražite neograničene mogućnosti dizajna.

Neograničene mogućnosti dizajna

Qbiss One je jedan od najglatkijih i najravnijih metalnih fasadnih rešenja.

Qbiss One se ističe svojim jedinstvenim i patentiranim zaobljenim uglovima, koje eliminišu potrebu za sečenjem, zavarivanjem, preklapanjem ploča koje su na konvencionalnim ventilisanim fasadnim sistemima vrlo često mesta na kojima se javljaju oštećenja i eventualni gubitak boje.

Qbiss One je dostupan u ravnoj i zaobljenoj opciji za još širu primenu sistema kao i sa udubljenim i ravnim spojevima ili u kombinaciji navedene dve opcije. Qbiss One element može se montirati na različite načine: vertikalna, horizontalna i asimetručna montaža ili montaža na smicanje (izgled cigle). Kombinacije pružaju najšire mogućnosti projektovanja i omogućavaju dizajniranje jedinstvenih rešenja.

Jedinstvena glatkoća, duži elementi

Čista i glatka površina fasade izvodljiva je primenom Qbiss One sistema, koji se ističe svojom izrazitom glatkoćom u bilo kojoj veličini elemenata.

Uz dužine od 530 mm do 6,500 mm Qbiss One obezbeđuje preko 100% duže elemente nego konvencionalni ventilisani fasadni sistemi koji su obično standardnih dužina, do 3 metra.

Opcije spojeva

Qbiss One sistem dozvoljava kombinovanje različitih uvučenih i ravnih spojeva elemenata.

Opcija spajanja B-B

Opcija spajanja F-BF

Qbiss One FB permutations of recessed and flush joint

Opcija spajanja F-B

Qbiss One BF permutations of recessed and flush joint

Opcija spajanja B-BF

Qbiss One BF-B permutations of recessed and flush joint

Opcija spajanja BF-B

Qbiss One BF-F permutations of recessed and flush joint

Opcija spajanja BF-BF

ARTME DIZAJN

ArtMe je najnovija, jedinstvena fasadna površinska obrada koja dozvoljava neograničene oblike, šare, vizuelne efekte koji mogu da se realizuju na fasadi za upečatljive, jedinstvene i kreativne rezultate.

Od dizajna i slika do natpisa, logo-a, brenda i unapred pripremljenih/gotovih rešenja, ArtMe sve to čini mogućim bez potrebe za lepkom ili dodatnim elementima.

ArtMe koristi visoko kontrolisanu tehnologiju 3D iscrtavanja oblika, koja se prvi put koristi na gotovim fasadnim elementima koji su prethodno premazani antikorozivnom zaštitom. Prepoznajući važnost performansi proizvoda, originalni integritet i karakteristike elemenata fasade sačuvani su bez kompromisa.

Tehnologija koja se nalazi iza preoblikovane površine fasade omogućava da napravite bilo koji izbor, iako postoji mogućnost odabira unapred dizajniranih oblika.

Opcije montaže

VERTICAL BRICK INSTALLATION

Vertical Brick structured installation enables individual façade elements to be connected vertically. Variety can be achieved by installing modular façade elements with a shift in a horizontal direction.

Qbiss One horizontal classic installation

HORIZONTAL INSTALLATION

This installation presents the classic and most commonly used orientation type. The horizontal modular façade system is composed of individual façade elements, joined in the horizontal direction (longitudinal) with a tongue & groove stack system, and fixed to the supporting structure in a vertical direction (transversal). Longitudinal joint sealing is accomplished using gaskets, integrated in both longitudinal joints; transversal joints (vertical joints) are sealed with a specially profiled gasket.

OFFSET OR SHIFTED HORIZONTAL INSTALLATION

So-called "brick-built installation" is the latest innovation to hit the façade element market. This solution not only enables a symmetrical shift (the vertical joint in the middle of the upper or lower façade element is offset) but also means that vertical joints can be located anywhere on the longitudinal axis of the neighbouring horizontal façade elements.

HORIZONTAL ASYMMETRICAL INSTALLATION

This innovative installation offers another modern facade option to architects who may be seeking to add further individuality to their projects. With asymmetrical structured installation, the horizontal axis is completely aligned along the whole width of the building, whilst the verticals are aligned according to a random installation. This way, the building envelope creates a modern dynamism, highlighting the form of the building and other architectural features.

VERTICAL INSTALLATION

Classical vertical modular façade system is composed of individual façade elements, joined in a vertical direction (transversal) with a tongue and groove system, and fixed to the supporting structure in a horizontal direction (longitudinal). Longitudinal joint sealing is accomplished using gaskets, integrated in both longitudinal joints, with additional sealant in the groove of the EPDM corner element; transversal joints (horizontal joints) of the element are sealed with a specially profiled gasket.

VERTICAL BRICK INSTALLATION

HORIZONTAL INSTALLATION

This installation presents the classic and most commonly used orientation type. The horizontal modular façade system is composed of individual elements, joined in the horizontal direction (longitudinal) with a tongue & groove stack system, and fixed to the supporting structure in a vertical direction (transversal). Longitudinal joint sealing is accomplished using gaskets, integrated in both longitudinal joints; transversal joints (vertical joints) are sealed with a specially profiled gasket.